| DTC Strategy |
- Engine speed is below the target while Idle Speed Control (ISC) torque is around the maximum
|
- Intake system for blockage
- Throttle plate for carbon deposits
|
| Enable Conditions |
- Time after engine start is greater than 2s
- ECT is greater than 60°C (140°F)
- IAT is greater than -10.5°C (13.1°F)
- Accelerator pedal is same as 0%
- Vehicle speed is same as 0
- Barometric pressure is greater than 74.5kPa
|
| Threshold Value |
- Difference between target engine speed and actual engine speed is greater than 100RPM
- Difference between maximum idle torque and actual idle torque is greater than 10Nm
|
| Diagnostic Time |
|
| MIL ON Condition |
|