DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	CKP signal is 0V while camshaft rotation detected	Poor connector connection Open or short in signal circuit CKPS
Enable Conditions	CMPS error (P034100/P036600/P034000/P036500) Vehicle speed is between 1 and 25.75km/h (0.6 and 16mph) Engine speed is less than 400RPM No error on vehicle speed No disabling faults present (CMPS error) No engine reverse rotation
Threshold Value	Counter of no CKP signal per camshaft revolution is greater than 6 times
Diagnostic Time	Continuously
MIL ON Condition	2 driving cycles