DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy	Case1	Circuit check, low	Poor connector connection Short to ground in signal circuit BPS
DTC Strategy	Case2	Range check, low
Enable Conditions	Case1	Engine speed is greater than 80RPM
Enable Conditions	Case2	-
Threshold Value	Case1	Sensor voltage is less than 0.10V
Threshold Value	Case2	Pressure is less than 50kPa
Diagnostic Time	Case1	Continuously (2.5s)
Diagnostic Time	Case2	Continuously (5s)
MIL ON Condition		2 driving cycles