LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - 1.6L >> Water Pump >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary.
  2. Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary.
  3. Check for coolant leakage. If coolant leaks from hole, the seal is defective. Replace the coolant pump assembly and gasket.
    NOTE: A small amount of seepage from the bleed hole is normal.
scientia non olet · About LEMON Manuals