LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - 1.6L >> Radiator >> Repair Procedures >> Inspection >> Radiator Leakage Test

Radiator Leakage Test

  1. Wait until engine is cool, then carefully remove the radiator cap and fill the radiator with engine coolant, then install it on the pressure tester.
    G13280292Courtesy of KIA MOTORS AMERICA, INC.
  2. Apply a pressure of 93.16 - 122.58 kPa (0.95 - 1.25 kg/cm2 , 13.51 - 17.78 psi) to the pressure tester.
  3. Inspect for engine coolant leaks and a drop in pressure.
  4. If coolant leak or pressure drop is occur, replace the part.
    NOTE: Check for engine oil in the coolant and/or coolant in the engine oil.
scientia non olet · About LEMON Manuals