| DTC Strategy |
|
- Poor connector connection
- Open or short in master pressure sensor circuit
- Faulty ESC
|
| Enable Condition |
- Ignition "ON"
- No related DTC is stored
|
| Threshold Value |
- A failure is detected if pressure sensor (+) or pressure sensor (-) voltage is higher than 4.7 to 4.9V or lower than 0.1 to 0.3V for more than specification time
- A failure is detected if the average of pressure sensor (+) and pressure sensor (-) voltage is out of 2.0 to 3.0V for more than specification time
|
| Disable Condition |
- Ignition "OFF" and then "ON"
|
| Warning Lamp |
- ESC (ESP)/DBC/AVH warning lamp "ON"
|
| Failsafe |
|