| DTC Strategy |
|
- Poor connector connection and open or short circuit
- Wheel speed sensor connector and wire unstable connection
- Water flow into wheel speed sensor connector and wiring
- Open or short in wheel speed sensor circuit
- Faulty wheel speed sensor
- Faulty HECU
|
| Enable Condition |
- Engine "ON"
- No related DTC is stored
|
| Threshold Value |
- If the wheel speed sensor current is out of the specific range of 3.6 to 66mA for more than 140ms
- If the leakage current of wheel speed sensor is above specific current for more than 140ms
|
| Warning Lamp |
- In case of failure on more than one wheel
- ESC/DBC/AVH warning lamp "ON"
- In case of failure on more than two wheels
- In case of failure on all wheels
|
| Failsafe |
- Ignition "OFF" and then "ON"
|