Removal And Installation
- Disconnect the battery negative terminal.
- Disconnect the vacuum pump connector (A).
- Remove the air duct and air cleaner assembly.
G 1.6 T-GDI GAMMA (Refer to Engine Mechanical System - "AIR CLEANER ")
- Disconnect the RCV solenoid valve connector (A) and booster pressure sensor (BPS) connector (B).
- Disconnect the intercooler outlet hose (A).
- Disconnect the clip (A) from the vacuum pump bracket.
- Remove the engine room under cover.
G 1.6 T-GDI GAMMA (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")
- Disconnect the vacuum hose (A) and then remove the vacuum pump (B).
Tightening torque:
19.6 - 29.4 N.m (2.0 - 3.0 kgf.m, 14.5 - 21.7 lb.ft)
- Install in the reverse order of removal.