LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System >> Stop Lamp Switch >> Repair Procedures >> Inspection >> KDS Data Analysis

KDS Data Analysis

  1. Analyze KDS data and check for any abnormality with the stop lamp switch.
    1. Connect the KDS to the self-diagnosis connector.
    2. Turn the spark switch on.
    3. Step on the brake pedal.
    4. Inspect the "brake switch" category that displays the "sensor data" KDS.

      Normal waveform:  The pressure sensor signal value will change according to the brake ON/OFF switch.

G13281706Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals