LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System >> Rear Disc Brake >> Repair Procedures >> Inspection >> Disc cleaning before inspection

Disc cleaning before inspection

  1. Check the brake disc for rust.
  2. Spray the cleaing solution on rusted surface of disc.

    Cleaning solution :  Water-Detergent [Water : 0.08 gal (300 ml) Detergent : 0.004 gal (15 ml)]

  3. Drive the vehicle up to 30 MPH and depress the brake up to stop for complete repeat more than 5 cycles.
  4. Clean the disc with water.
  5. Visually verify that rust is completely removed.
  6. If rust has not been removed, repeat the procedure above.
scientia non olet · About LEMON Manuals