LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Smart Key Diagnosis >> DTC B1603-00: CAN Bus OFF >> DTC Inspection >> Monitor DTC Status

Monitor DTC Status

Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS to "Data Link Connector (DLC)".
  2. Monitor "Diagnostic Trouble Codes (DTC)" with KDS.
 Fig. 1
G13288491Courtesy of KIA MOTORS AMERICA, INC.

Active Fault 

  1. Go to "Wiring Inspection " procedure.

History/Pending Fault 

  1. Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
  2. Repair or replace as necessary and go to "Verification of Repair " procedure.
scientia non olet · About LEMON Manuals