DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Check the communication status between ECM/PCM and KDS	Check for "LEARNT" ECM/PCM PIN code Check for "LEARNT" ECM/PCM password
Enable Condition	Ignition "ON" Normal battery voltage is 9 to 16V
Threshold Value	Invalid PIN or password is inputted for more than 3 times
Detecting Time	Immediately
Erase Condition	Normal PIN or password received DTC erasing with KDS Auto delete after standing for 1 hour at B+ power (Lock timer initialize when power reset)