| DTC Strategy |
- Check the CAN data status receiving from ECM/PCM
|
- Open or short in communication circuit
|
| Enable Condition |
- Ignition "ON"
- Normal battery voltage is 9 to 16V
|
| Threshold Value |
- No data transmitted from EMS
- EMS communication bad
- EMS communication line open
|
| Detecting Time |
|
| Symptom |
- Engine start is impossible
- Some diagnostic menu can not be used
|
| Erase Condition |
- Active DTC Erasing
- Normal transponder searching
- History and active DTC erasing
- Ignition "OFF" → "ON" 30 times
- DTC erasing with KDS
- Normal key registration completed
|