Component Inspection
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
Subwoofer speaker1 | 1 (+) | Subwoofer speaker1 | 2 (-) | Approx. 1.8Ω (20°C (68°F)) |
Good
- If no problems were found with the circuits or connectors, replace the AMP and go to "Verification of Repair " procedure.
No Good
- If no problems were found with the circuits or connectors, replace the subwoofer speaker and go to "Verification of Repair " procedure.