DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	System monitoring	Poor connector connection System calibration is not carried out MFC
Enable Condition	Ignition "ON" or engine "ON"
Threshold Value	Calibration is not performed Failed calibration
Detecting Time	Immediately
MIL ON Condition	Immediately
Symptom	LKA/LDW disabled LKA/LDW warning lamp turns on
Service Lamp ON Condition	USM "ON"
Service Lamp OFF Condition	In case of satisfying release condition

NOTE: LKA: Lane Keeping Assist
LDW: Lane Departure Warning
HBA: High Beam Assist
FCA: Forward Collision-avoidance Assist
ISLW: Intelligent Speed Limit Warning
DAW: Driver Attention Warning
HDA: Highway Driving Assist