Component Inspection

Inspection Condition	Inspection Procedure	Reference
Engine "ON".	Activate the LDWS switch. Check the light of MFC on the instrument cluster.	Fig.1

Courtesy of KIA MOTORS AMERICA, INC.

Good

Go to "Verification of Repair " procedure.
If no problems were found with the circuits or connectors, replace the MFC ECU and go to "Verification of Repair " procedure.
* In case of replacing MFC ECU, perform following "System Inspection" procedures.

No Good

If no problems were found with the circuits or connectors, replace the LDWS switch and go to "Verification of Repair " procedure.