LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind-Spot Collision Warning Diagnosis >> DTC C2703-54: Control Module Slave Missing Calibration >> Component Inspection >> Notes

Component Inspection: Notes

NOTE: * Check before correction
  1. Refer to "BCW(BSD) Radar Calibration" in "Shop Service Information", check the vehicle condition and whether the BCW unit or bracket is deformed (mounting angle, twisted vehicle body, etc.). Refer to REAR CORNER RADAR INSTALLATION ANGLE CALIBRATION .
  2. Refer to "Correcting the BCW Angle" in "Shop Service Information", after replacing the BCW unit or bracket, with the bumper removed, use the BCW unit correction tool set to perform angle correction.Refer to REAR CORNER RADAR INSTALLATION ANGLE CALIBRATION .
  3. After checking and correcting the BCW unit angle, perform the BCW radar correction procedure.
scientia non olet · About LEMON Manuals