DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	CAN signal check	Poor connection Open or short in CAN communication line TCU (PCM/TCM)
Enable Condition	2s elapsed after ignition "ON" Normal input voltage condition (C110117/C110216 DTC not generated) BCW "ON" or RCCW "ON" CAN communication line abnormal DTC not generated Transmission specification information from EMS receiving with "AT" CAN signal on CGW reception error DTC (C181287) not generated
Threshold Value	When TCU CAN message is not received
Detecting Time	1s