| DTC Strategy |
|
- CAN high and low line coincidentally short to battery
- CAN high and low line coincidentally short to ground
- Faulty the IBU
|
| Enable Conditions |
- Ignition "ON"
- Battery voltage is between 9V and 16V
|
| Threshold Value |
- P-CAN high and low circuit simultaneous 0V detection (short to ground)
- P-CAN high and low circuit simultaneous battery voltage detection (short to battery)
|
| Detecting Time |
- 2s elapsed after P-CAN bus off error occurs
|
| DTC Erasing |
- DTC erasing to using KDS equipment after troubleshooting
- Ignition "ON" and "OFF" without current fault 30 times continuous DTC auto erase (30 times counter reset during current fault during ignition "ON" and "OFF")
|