LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> BCM Diagnosis >> DTC B1210-00: Front Left Sensor Fault >> DTC Inspection >> Monitor DTC Status

Monitor DTC Status

Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS to "Data Link Connector (DLC)".
  2. Monitor "Diagnostic Trouble Codes (DTC)" with KDS.
 Fig. 1
G13288388Courtesy of KIA MOTORS AMERICA, INC.

Active Fault 

  1. Go to "System Inspection " procedure.

History/Pending Fault 

  1. Fault is intermittent caused by poor contact in "IBU-BCM" or PDW sensor
    • PDW front left sensor's connector or was repaired and "IBU-BCM" memory was not cleared.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Repair or replace as necessary, go to "Verification of Repair " procedure.
scientia non olet · About LEMON Manuals