DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Internal Monitoring	Defected Internal EPB ECU
Threshold Value	ECU Hardware (Case1)	If MCU can't erase or write a data of the EEPROM If the master/slave MCU detects abnormal operation in RAM, ROM, Interrupt, Timer, A/D converter and Cycle time
	Current Sensor Open, Short to GND/BAT (Case2)	Current sensor voltage is either higher than 4.8V or lower than 0.2V for more than 200 msec.
	Current Sensor Offset Abnormal (Case 3)	Current value is 2A for more than 200 msec after 5 seconds upon complete control
	CAN Hardware (Case 4)	CAN Hardware Failure
Fail Safe		EPB operation inhibited
Warning Indicator Lamp Status		Warning Indicator Lamp "ON"
Clear Condition		Ignition "OFF" and then "ON"