General Information: General Description
If the seat is occupied, body sense sensor detects how passenger weighs and send signal to SRSCM via CAN. The SRSCM recognizes the signal as three different classifications; that is, 0 (Empty), 1 (Small), 2 (Large). With these signal, SRSCM determines whether it needs to deploy Passenger Airbag (PAB) or not.
NOTE:
if any of the following conditions occur, 'Occupant Classification System (WCS, PODS, BOSE) Reset must be performed again after checking OCS Diagnostic Codes.
- Passenger side BodySense sensor (ECU) or seat cushion assy (except of seat track assy) is replaced.
- The telltale lamp is not illuminated when the passenger seat is not occupied.
- The telltale lamp is delayed more than 10 seconds to be turned off when an adult passenger seats in.
NOTE:
| SRSCM (Supplemental Restraints System Control Module) | AWL (ACU Warning Lamp) |
| FIS (Front Impact Sensor) | DAB (Driver Airbag) |
| DSIS (Side Impact Sensor) | PAB (Passenger Airbag) |
| PSIS (Side Impact Sensor) | DBS (Driver Buckle Switch) |
| DSIS (Driver Side Impact Sensor) | PBS (Passenger Buckle Switch) |
| PSIS (Passenger Side Impact Sensor) | DBPT (Driver Belt Pretensioner) |
| DSAB (Driver Side Airbag) | PBPT (Passenger Belt Pretensioner) |
| PSAB (Passenger Side Airbag) | DAPT (Driver Anchor Pretensioner) |
| DCAB (Driver Curtain Airbag) | PAPT (Passenger Anchor Pretensioner) |
| PCAB (Passenger Curtain Airbag) | OCS (Occupant Classification System) |