LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima SX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Dual Clutch Transmission Diagnosis - 1.6L (2 Of 2) (Except HEV)) >> DTC P1921-77: Gear 2 System Referencing Failure >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • Monitoring maximum length of left/right gear shift motor2
  1. Faulty Gear Actuator2
  2. Faulty DCT
  3. Mechanical failure on gear2 Shift direction
Enable Condition
  • Gear shift motor 2 hall sensor is normal when reference point is found during engine cranking
Threshold Value
  • Maximum motion of gear shift motor 2 is less than 19.4 mm or greater than 22 mm
Detecting Time
  • 3 events
Fail Safe
  • Drive at Odd gear
scientia non olet · About LEMON Manuals