LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima SX >> Repair and Diagnosis >> External Pages >> Different car >> Section 554 (Double Clutch Transmission Diagnosis - 1.6L (3 Of 4)) >> DTC P0921-98: Gear 1 System Motor Thermal Damage >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13505653Courtesy of KIA MOTORS AMERICA, INC.
G13505654Courtesy of KIA MOTORS AMERICA, INC.
G13505655Courtesy of KIA MOTORS AMERICA, INC.
G13505656Courtesy of KIA MOTORS AMERICA, INC.
G13505657Courtesy of KIA MOTORS AMERICA, INC.
G13505658Courtesy of KIA MOTORS AMERICA, INC.
G13505659Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals