LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima SX >> Repair and Diagnosis >> External Pages >> Different car >> Section 554 (Double Clutch Transmission Diagnosis - 1.6L (3 Of 4)) >> DTC P090B-7F: Clutch 2 System Stuck Off >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13505550Courtesy of KIA MOTORS AMERICA, INC.
G13505551Courtesy of KIA MOTORS AMERICA, INC.
G13505552Courtesy of KIA MOTORS AMERICA, INC.
G13505553Courtesy of KIA MOTORS AMERICA, INC.
G13505554Courtesy of KIA MOTORS AMERICA, INC.
G13505555Courtesy of KIA MOTORS AMERICA, INC.
G13505556Courtesy of KIA MOTORS AMERICA, INC.