LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima SX >> Repair and Diagnosis >> External Pages >> Different car >> Section 554 (Double Clutch Transmission Diagnosis - 1.6L (3 Of 4)) >> DTC P090B-7E: Clutch 2 System Stuck On >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13505533Courtesy of KIA MOTORS AMERICA, INC.
G13505534Courtesy of KIA MOTORS AMERICA, INC.
G13505535Courtesy of KIA MOTORS AMERICA, INC.
G13505536Courtesy of KIA MOTORS AMERICA, INC.
G13505537Courtesy of KIA MOTORS AMERICA, INC.
G13505538Courtesy of KIA MOTORS AMERICA, INC.
G13505539Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals