LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima SX >> Repair and Diagnosis >> External Pages >> Different car >> Section 553 (Double Clutch Transmission Diagnosis - 1.6L (1 Of 4)) >> DTC P074A-71: Unable To Engage (Select) Gear 2 >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13504993Courtesy of KIA MOTORS AMERICA, INC.
G13504994Courtesy of KIA MOTORS AMERICA, INC.
G13504995Courtesy of KIA MOTORS AMERICA, INC.
G13504996Courtesy of KIA MOTORS AMERICA, INC.
G13504997Courtesy of KIA MOTORS AMERICA, INC.
G13504998Courtesy of KIA MOTORS AMERICA, INC.
G13504999Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals