LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima SX >> Repair and Diagnosis >> External Pages >> Different car >> Section 553 (Double Clutch Transmission Diagnosis - 1.6L (1 Of 4)) >> DTC P074A-07: Gear Dropout Gear 2 >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13504980Courtesy of KIA MOTORS AMERICA, INC.
G13504981Courtesy of KIA MOTORS AMERICA, INC.
G13504982Courtesy of KIA MOTORS AMERICA, INC.
G13504983Courtesy of KIA MOTORS AMERICA, INC.
G13504984Courtesy of KIA MOTORS AMERICA, INC.
G13504985Courtesy of KIA MOTORS AMERICA, INC.
G13504986Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals