LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 572 (Double Clutch Transmission Diagnosis - 1.6L (3 Of 4)) >> DTC P0921-77: Gear 1 System Referencing Failure >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13505640Courtesy of KIA MOTORS AMERICA, INC.
G13505641Courtesy of KIA MOTORS AMERICA, INC.
G13505642Courtesy of KIA MOTORS AMERICA, INC.
G13505643Courtesy of KIA MOTORS AMERICA, INC.
G13505644Courtesy of KIA MOTORS AMERICA, INC.
G13505645Courtesy of KIA MOTORS AMERICA, INC.
G13505646Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals