LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 516 (Double Clutch Transmission Diagnosis - 1.6L (2 Of 4)) >> DTC P0805-64: Clutch 1 Motor Position Sensor circuit >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13505296Courtesy of KIA MOTORS AMERICA, INC.
G13505297Courtesy of KIA MOTORS AMERICA, INC.
G13505298Courtesy of KIA MOTORS AMERICA, INC.
G13505299Courtesy of KIA MOTORS AMERICA, INC.
G13505300Courtesy of KIA MOTORS AMERICA, INC.
G13505301Courtesy of KIA MOTORS AMERICA, INC.
G13505302Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals