LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 516 (Double Clutch Transmission Diagnosis - 1.6L (2 Of 4)) >> DTC P074F-77: Unable To Disengage (Shift) Gear 7 >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13505279Courtesy of KIA MOTORS AMERICA, INC.
G13505280Courtesy of KIA MOTORS AMERICA, INC.
G13505281Courtesy of KIA MOTORS AMERICA, INC.
G13505282Courtesy of KIA MOTORS AMERICA, INC.
G13505283Courtesy of KIA MOTORS AMERICA, INC.
G13505284Courtesy of KIA MOTORS AMERICA, INC.
G13505285Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals