LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 516 (Double Clutch Transmission Diagnosis - 1.6L (2 Of 4)) >> DTC P074F-71: Unable To Engage (Select) Gear 7 >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "OFF".
  2. Ignition "ON".
  3. Gear lever position "P".
  4. Brake status "ON".
  5. No DTC.
  1. Ignition "OFF".
  2. Connect KDS to "Data Link Connector (DLC)".
  3. Select the "Vehicle S/W Management" about related DTC with KDS.
  4. Perform "DCT Learning function" and go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 7
CAUTION: In case of replacing TCM or DCT perform following procedures.
G13505253Courtesy of KIA MOTORS AMERICA, INC.
G13505254Courtesy of KIA MOTORS AMERICA, INC.
G13505255Courtesy of KIA MOTORS AMERICA, INC.
G13505256Courtesy of KIA MOTORS AMERICA, INC.
G13505257Courtesy of KIA MOTORS AMERICA, INC.
G13505258Courtesy of KIA MOTORS AMERICA, INC.
G13505259Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals