LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima EX Premium >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Dual Clutch Transmission Diagnosis - 1.6L (2 Of 2) (Except HEV) >> DTC U0100-87: Lost Communication With ECM/PCM >> Wiring Inspection >> CAN Communication Line Inspection >> Short in CAN Communication Line Inspection

Short in CAN Communication Line Inspection

  1. Ignition "ON".
  2. Measure voltage between Pin No. 85 (CAN High) terminal of ECM and chassis ground.
  3. Measure voltage between Pin No. 63 (CAN Low) terminal of ECM and chassis ground.

    Specification:  CAN High Voltage - Approx. 3.28V/CAN Low Voltage - Approx. 1.87V

  4. Ignition "Off"
  5. Disconnect TCM and ECM/PCM connectors.
  6. Measure resistance between Pin No. 44 (CAN High) terminal of TCM and Pin No. 85 (CAN High) terminal of ECM.
  7. Measure resistance between Pin No. 45 (CAN Low) terminal of TCM and Pin No. 63 (CAN Low) terminal of ECM.

    Specification:  Approx. 0Ω

  8. Is measured value within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals