LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Niro LX >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Active Hydraulic Boost (AHB) System (HEV) >> Pressure Source Unit >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Installation is the reverse of removal.
  2. Check the brake pedal operation.
  3. After filling the brake fluid in the reservoir, perform the air bleed.

    (Refer to the Brake system - "BRAKE BLEEDING PROCEDURES ")

  4. Conduct the pedal travel sensor (PTS) calibration.

    (Refer to the Brake System - "BRAKE PEDAL ")

  5. Conduct the pressure sensor calibration.
scientia non olet · About LEMON Manuals