Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457339

Courtesy of KIA MOTORS AMERICA, INC.

G13457340

Courtesy of KIA MOTORS AMERICA, INC.

G13457341

Courtesy of KIA MOTORS AMERICA, INC.

G13457342

Courtesy of KIA MOTORS AMERICA, INC.

G13457343

Courtesy of KIA MOTORS AMERICA, INC.

G13457344

Courtesy of KIA MOTORS AMERICA, INC.

G13457345

Courtesy of KIA MOTORS AMERICA, INC.

G13457346

Courtesy of KIA MOTORS AMERICA, INC.

G13457347

Courtesy of KIA MOTORS AMERICA, INC.

G13457348

Courtesy of KIA MOTORS AMERICA, INC.

G13457349

Courtesy of KIA MOTORS AMERICA, INC.

G13457350

Courtesy of KIA MOTORS AMERICA, INC.