LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Niro LX >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Autonomous Emergency Braking (AEB) System Diagnosis (HEV) >> DTC C1613-82: CAN Signal Error EMS >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

CAUTION:
  • * Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
  • * Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS to Data Link Connector (DLC).
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.
  • Fig.1 to 4
  • Fig.5 to 12
G13457377Courtesy of KIA MOTORS AMERICA, INC.
G13457378Courtesy of KIA MOTORS AMERICA, INC.
G13457379Courtesy of KIA MOTORS AMERICA, INC.
G13457380Courtesy of KIA MOTORS AMERICA, INC.
G13457381Courtesy of KIA MOTORS AMERICA, INC.
G13457382Courtesy of KIA MOTORS AMERICA, INC.
G13457383Courtesy of KIA MOTORS AMERICA, INC.
G13457384Courtesy of KIA MOTORS AMERICA, INC.
G13457385Courtesy of KIA MOTORS AMERICA, INC.
G13457386Courtesy of KIA MOTORS AMERICA, INC.
G13457387Courtesy of KIA MOTORS AMERICA, INC.
G13457388Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals