Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457320

Courtesy of KIA MOTORS AMERICA, INC.

G13457321

Courtesy of KIA MOTORS AMERICA, INC.

G13457322

Courtesy of KIA MOTORS AMERICA, INC.

G13457323

Courtesy of KIA MOTORS AMERICA, INC.

G13457324

Courtesy of KIA MOTORS AMERICA, INC.

G13457325

Courtesy of KIA MOTORS AMERICA, INC.

G13457326

Courtesy of KIA MOTORS AMERICA, INC.

G13457327

Courtesy of KIA MOTORS AMERICA, INC.

G13457328

Courtesy of KIA MOTORS AMERICA, INC.

G13457329

Courtesy of KIA MOTORS AMERICA, INC.

G13457330

Courtesy of KIA MOTORS AMERICA, INC.

G13457331

Courtesy of KIA MOTORS AMERICA, INC.