Repair Procedures: Replacement

Information 

• When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
• Take care not to bend or scratch the trim and panels.

1. Using a screwdriver or remover, remove the cluster fascia panel (A).

   Courtesy of KIA MOTORS AMERICA, INC.

2. To install, reverse the removal procedure.

   Information 

   • Make sure the connector are connected in properly.
   • Replace any damaged clips (or pin - type retainers).