LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Forte FE, Standard Trans >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System And Rear Wheel Alignment - Couple Torsion Beam Axle >> Rear Shock Absorber >> Repair Procedures >> Disposal

Repair Procedures: Disposal

  1. Fully extend the piston rod.
  2. Drill a hole on the (A) section to remove gas from the cylinder.
    G13304473Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION:
    • The gas coming out is harmless, but be careful of chips that may fly when drilling.
    • Be sure to wear safety goggles or eye protection when performing this task.
scientia non olet · About LEMON Manuals