LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Optima EX >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System Diagnosis (2 Of 3) (Except HEV) >> DTC B1375-00: Passenger Airbag Active Vent Resistance Circuit To Ground >> DTC Inspection >> Monitor KDS Data

Monitor KDS Data

  1. Ignition "OFF", connect KDS.
  2. Ignition "ON", select "Current Data" mode.
  3. Monitor the "Passenger airbag active vent resistance" parameter on the KDS.

    Specification: 

    Resistance of Passenger airbag active vent greater than 1.0Ω

    Resistance of Passenger airbag active vent less than 7.0Ω

    Reference: 

    In a case of an open in the 3rd stage Passenger airbag circuit: FAIL

    In a case of a short to battery in the 3rd stage Passenger airbag circuit: FAIL

    In a case of a short to ground in the 3rd stage Passenger airbag circuit: FAIL

    G12904960Courtesy of KIA MOTORS AMERICA, INC.
  4. Is parameter displayed within specifications?

    YES 

    • Fault is intermittent caused by poor contact in the part's and/or SRSCM connector or was repaired and SRSCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

    NO 

scientia non olet · About LEMON Manuals