[Center Fascia Lower Panel]

1. Remove the crash pad side cover [LH] (A) by using a remover.
   Fig 1: Removing Crash Pad Side Cover By Using Remover (LH)

   Courtesy of KIA MOTORS AMERICA, INC.
2. Remove the crash pad lower panel (A) after loosening the screw.
   Fig 2: Removing Crash Pad Lower Panel Screw

   Courtesy of KIA MOTORS AMERICA, INC.
3. Disconnect the fuel filler door switch connector (A).
   Fig 3: Locating Fuel Filler Door Switch Connector

   Courtesy of KIA MOTORS AMERICA, INC.
4. Remove the crash pad side cover [RH] (A) by using a remover.
   Fig 4: Removing Crash Pad Side Cover (RH)

   Courtesy of KIA MOTORS AMERICA, INC.
5. Remove the crash pad garnish [LH] (A) by using a remover.
   Fig 5: Removing Crash Pad Garnish By Using Remover (LH)

   Courtesy of KIA MOTORS AMERICA, INC.
6. Disconnect the start/stop button connector (A).
   Fig 6: Locating Start/Stop Button Connector

   Courtesy of KIA MOTORS AMERICA, INC.
7. Pull out and remove the gear knob (A).
   Fig 7: Removing Gear Knob

   Courtesy of KIA MOTORS AMERICA, INC.
8. Remove the front console upper cover (A) by using a remover.
   Fig 8: Removing Front Console Upper Cover

   Courtesy of KIA MOTORS AMERICA, INC.
9. Disconnect the console upper cover connector (A).
   Fig 9: Locating Console Upper Cover Connector

   Courtesy of KIA MOTORS AMERICA, INC.
10. Remove the center fascia lower panel (A) by using a remover.
    Fig 10: Removing Center Fascia Lower Panel

    Courtesy of KIA MOTORS AMERICA, INC.
11. Install in the reverse order of removal.

Information 

• Make sure the connector is connected properly.
• Replace any damaged clips.