LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Niro Plug-In Hybrid EX >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Crash Pad (PHEV) >> Steering Column Shroud Panel >> Repair Procedures >> Replacement >> Steering column shroud upper panel

Steering column shroud upper panel

  1. Remove the crash pad side cover [LH] (A) by using a remover.
    G12697391Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the crash pad lower panel (A) after loosening the screw.
    G12697392Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the fuel filler door switch connector (A).
    G12697393Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the crash pad plate [LH] (A) after loosening the screw.
    G12697394Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the crash pad plate [LH] connector (A).
    G12697395Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the crash pad side cover [RH] (A) by using a remover.
    G12697396Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the crash pad garnish [LH] (A) by using a remover.
    G12697397Courtesy of KIA MOTORS AMERICA, INC.
  8. Disconnect the start/stop button connector (A).
    G12697398Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove the cluster fascia panel (A) by using a remover.
    G12697399Courtesy of KIA MOTORS AMERICA, INC.
  10. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals