LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Niro EX >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Active Hydraulic Boost (AHB) System (HEV) >> Front Disc Brake >> Repair Procedures >> Inspection >> Front Brake Pad Check

Front Brake Pad Check

  1. Check the pad wear. Measure the pad thickness and replace it, if it is less than the specified value.

    Pad Thickness 

    Standard value: 17 mm (0.6693 in)

    Service limit: 9.0 mm (0.3543 in)

    Fig 1: Checking Front Brake Pad Thickness
    G12329858Courtesy of KIA MOTORS AMERICA, INC.
  2. Check that grease is applied, to sliding contact points. Check for metal damage to the pad and backing.
scientia non olet · About LEMON Manuals