DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage Monitoring	Pedal Stroke pressure sensor fualty
Enable Condition	Ignition "ON"
Threshold Value	Failure is detected if Pressure sensor positive signal or Pressure sensor negative signal is greater than 4.8V or less than 0.2V for 1s Voltage average value of pressure sensor positive/negative signal is out range of 2V to 3V for more than 1s
Warning Lamp	EBD/RBS/ESC (ESP)/DBC/AVH warning indicator lamp "ON"
Disable Condition	Ignition "OFF" and then "ON"