| DTC Strategy |
|
- Booster chamber pressure sensor faulty
|
| Enable Condition |
|
| Threshold Value |
- Failure is detected if Pressure sensor positive signal or Pressure sensor negative signal is greater than 4.8V or less than 0.2V for 1s
- Voltage average value of pressure sensor positive/negative signal is out range of 2V to 3V for more than 1s
|
| Warning Lamp |
- EBD/RBS/ABS/ESC (ESP)/DBC/AVH warning indicator lamp "ON"
- When both BC1 and BC2 Pressure sensor are failed, Buzzer is ON
|
| Disable Condition |
- Ignition "OFF" and then "ON"
|