DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible cause
DTC Strategy	Signal monitoring	Poor connector connection and open or short circuit Wheel speed sensor connector and wire unstable connection Water flow into wheel speed sensor connector and wiring Open or short in wheel speed sensor circuit Faulty wheel speed sensor Faulty IBAU
Enable Condition	Ignition "ON"
Threshold Value	Sensor signal current is out of normal range for 0.14s * Specification: 4 to 60mA (±10%)
Warning Lamp	In case of failure on more than two wheels EBD/RBS/ABS/ESC (ESP)/DBC/AVH Warning Indicator Lamp "ON" (Inhibits EBD) In case of failure on all wheels AHB/EBD/RBS/ABS/ESC (ESP)/DBC/AVH Warning Indicator Lamp "ON"
Disable Condition	Ignition "OFF" and then "ON"