Repair Procedures: Replacement

Remove the cap (A) and remove the nuts, then remove the wiper arm (B).
Tightening torque:

22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb.ft)

Fig 1: Locating Wiper Arm And Cap With Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the nozzle hose (B).
Detach the clips, then remove the cowl top cover (A).
Information
- Clean the bottom side of windshield glass which be close by cowl top cover.
Fig 2: Locating Cowl Top Cover And Nozzle Hose With Clips
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information
- Replace any damaged clips.