Repair Procedures: Replacement

CAUTION: Put on gloves to protect your hands.

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

Remove the multi box hole cap (A), and then loosen the screw to remove the multi box (B).

Fig 1: Locating Multi Box Hole Cap & Screw

Courtesy of KIA MOTORS AMERICA, INC.

Information

Replace any damaged clips.