LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Rio EX, 4D Hatchback >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Using a screwdriver or remover, remove the cluster fascia panel (A).
    Fig 1: Locating Cluster Fascia Panel
    G11849577Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the start/stop button connector (A) and hazard switch connector (B).
    Fig 2: Locating Start/Stop Button Connector And Hazard Switch Connector
    G11849578Courtesy of KIA MOTORS AMERICA, INC.
  4. Using a screwdriver or remover, remove the cluster fascia panel (A).
    Fig 3: Locating Cluster Fascia Panel
    G11849579Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the cluster fascia (A) from the crash pad after removing 2 screws.
    Fig 4: Locating Cluster Fascia With Screws
    G11849580Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the cluster fascia connectors (A) and then remove the cluster.
    Fig 5: Locating Cluster Fascia Connectors
    G11849581Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals