LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Optima SX >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Electric Parking Brake Diagnosis (Except HEV) >> DTC C1656-08: CAN Signal Error Cluster >> Wiring Inspection >> CAN Communication Line Inspection

CAN Communication Line Inspection

  1. Ignition switch "OFF"
  2. Disconnect battery (-) cable.
  3. Refer to REPAIR PROCEDURES and INSTRUMENT CLUSTER and disconnect HECU and Instrument cluster connector.
  4. Measure the resistance between Pin No. 44 (C-CAN High) terminal of HECU harness connector and Pin No. 32 (C-CAN High) terminal of instrument cluster harness connector.
  5. Measure the resistance between Pin No. 45 (C-CAN Low) terminal of HECU harness connector and Pin No. 33 (C-CAN Low) terminal of instrument cluster harness connector.

    Specification  : Approx. below 1 Ω

  6. Is the measured value within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals